SPRINGBACK

# 629 - Kim, H. Kimchi, M. and Altan, T., "Control of Springback in Bending and Flanging AHSS, 2009 International Auto Body Conference, November 2009, Troy, MI

 

#642-1 - Xi, Y., et al., "Investigation of Springback in Bending AHSS - Part II", Stamping Jouonal, Jan/Feb., 2011, p. 9-10

 

#638 - Kardes, N., et al., "Springback Prediction in Bending of AHSS - DP780", submitted NAMCR 2012, v. 40, Nov. 2011

 

#651 - Kim, H., Altan, T., et al., "Effects of Variable Elastic Modulus on Springback Predictions in Stamping of AHSS", Proceedings of ICTP, Sept. 25-20, 2011, Aachen, Germany

 

#672 - Yang, X., et al., "Prediction of Springback in Air Bending of Advanced High Strength Steel - DP780", accepted for publication in "International Journal of Mechanical Sciences", Nov. 19, 2015

 

#683-7 - Fallahiarezoodar, A., Katre, A., Altan, T., "Predicting Springback when Bending AHSS and Aluminum Alloys - Part I", Nov/Dec, 2016, Stamping Journal p. 12-13

 

#683-8 - Fallahiarezoodar, A., Katre, A., Altan., T., "Predicting springback when bending AHSS and aluminum alloys, Part II", Stamping Journal, Jan/Feb, 2017, p. 12-13

 

#683-11 - Gurun, H., Diaz, D., Altan, T., "Reducing Springback in U- and Hat-Bending of AHSS", Stamping Journal, July/August 2017

 

#688-3 - Gupta, T., et al., "Reduction of Springback in hat bending using variable blank holder force and a servo hydraulic cushion", Stamping Journal, March/April 2018, p. 16-17

 

#688-4 - Gupta, T., et al., "Reducing Springback using post-stretching with stake beads",  Stamping Journal, May/June 2018,, pg 20, 22

 

#689 - Fallahiarezoodar, A., et al., "Effect of E-modulus variation on springback and a practical solution", SAE Paper 2018-01-0630, April 2018

 

#691 - Fallahiarezoodar, A., et al., "Springback reduction in U-channel drawing of Al5182-0 by using a servo press and a servo hydraulic cushion", submitted to NUMISHEET 2018

 

#692 - Fallahiarezoodar A., et al., "Determination of variable E-modulus through wipe bending test and application to springback prediction", submitted to IDDRG, 2018