Friction/Lubrication/Wear
309 |
Darendeliler , H and Altan , T ; “Analysis of Axisymmetric Cup Drawing in Relation to Friction “ , Journal of Materials Processing Technology , Vol 58 (1996) p 293-301 |
1996 |
413-3 |
Altan , T ; “A practical approach to Evaluate Friction” R&D Update , Stamping Journal , Jul/Aug 2000 p80 |
2000 |
425 |
Ngaile , g ; Gutscher , G and Altan , T ; “Evaluation of Friction and Formability in Stamping : Practical Methods for Production” presented at the Sheet Forming Conference , April 12/13 , 200 , Detroit , MI , Stamping Journal , Sept/Oct 2000 p26 |
2000 |
501-6 |
ERC/NSM , “Evaluation of Stamping Lubrication using the Ironing Test “ , R&D Update , Stamping Journal , Nov/Dec 2003 , p50 |
2003 |
516 |
Cho , H ; Ngaile , G and Altan , T ; “Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis Technique” Annals of CIRP , v.1 , 2003 , p221 |
2003 |
520 |
Cho, H. & Allan, T "Determination of Flow Stress and Interface Friction at Elevated Temperatures by Inverse Analysis Technique" JMPT, v 170, Dec 2005, p.64 |
2005 |
539 |
Chandrasekharan, S., Palaniswamy, H., Jain, N. and Altan, T "Evaluation of Stamping Lubricants at Various Temperature Levels using the Ironing Test" International Journal of Machine Tools & Manufacture, v. 45 (2005), p. 379 |
2005 |
543-1 |
Lubrication Evaluation using Stamping Lubricant Tester (SLT), R&D Update, Stamping Journal, March 2004, p.40 |
2004 |
543-2 |
Twist Compression Testing (TCT) to Evaluate Friction, Lubrication, R&D Update, Stamping Journal, April 2004, p.32 |
2004 |
555-09 |
Evaluation of Dry Film Lubricants for Automotive Applications- Part l- A General Review, R&D Update, Stamping Journal, September 2005, p.38 |
2005 |
555-10 |
Evaluation of Dry Film Lubricants, Part II, Stamping Journal, October 2005, p.36 |
2005 |
555-11 |
Evaluation of Dry Film Lubricants, Part III, Stamping Journal, November 2005, p.30 |
2005 |
579 |
Kim and Altan "Evaluating Film Lubricants for Stamping- Deep drawing test makes the most sense" Stamping 2007 Journal, June 2007, p.26, also Fabricator, June 2007, p.1 |
2007 |
580 |
Yadav /Altan "Evaluation of Metal Formability & Lubrication for Stamping & Hydroforming" presented at the 2006 Stamping Journal Forum, Las Vegas, Nevada, March 14, 2006 |
2006 |
587 |
Kim, H.; Sung, J.H.; Sivai<urnar, R.; and Altan, T. "Evaluation of Stamping Lubricants Using the Deep Drawing Test" J. of Machine Tools & Manufacture, v. 47, Nr. 14, pp. 2120-2132 |
2007 |
605 |
Kim, H., & Altan, T., "Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) using the Twist Compression Test (TCT), JMPT, v. 205 (2008), pp. 459-468 |
2008 |
620-4 |
Penter, L., Yadav, A., and Altan, T., :Biaxial Bulge Test, Simulation Software Provide Accurate Data on Sheet Materials", Stamping Journal, June 2008, p. 16 |
2008 |
625 |
Kim, H., et al., Evaluation of Die Coatings and Stamping Lubricants in forming Galvanized AHSS Using the SDT. Proceedings of IDDRG, Golden, CO, 2009, p.749 |
2009 |
640 |
Kim, H., et al., (including Altan, T.), “Evaluation of stamping lubricants using the deep drawing test”, Int. J. of Machine Tools and Manufacture, v. 47, 2007, p. 2120-2132 |
2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|