You are here

FRICTION / LUBRICATION / WEAR

#611 -  H. Kim, et al., "Evaluation of tool materials, coatings and lubricants in forming galvanized advanced high strength steels (AHSS)", CIRP Annals, Manufacturing Technology, 2008, p. 299-304

 

#618 - Kim, H., Altan, T., Yan., Q., "Evaluation of Lubricants in Forming AHSS using Deep Drawing and Ironing Tests", JMPT, v. 209, Oct. 2008, p. 4122-4133

 

#620-1 - Kim, H., and Altan, T., "Lubrication and Galling in Stamping of Galvanized AHSS" - Part I: Using the twist-compression test for evaluation - Stamping Journal, Jan/Feb. 2008, p. 14

 

#620-2 - "Lubrication and Galling in Stamping of Galvanized AHSS" - Part II: Evaluating the deep-drawing performance of stamping lubricants - Stamping Journal, March, 2008, p. 22

 

#620-3 - "Lubrication and Galling in Stamping of Galvanized AHSS" - Part III: B-pillar simulations and the strip drawing test (SDT) - Stamping Journal, April, 2008, p. 18

 

#628-1 - Groseclose, A., "Evaluating lubricant performance for stamping" - Part I: Analysis factors and testing methods - Stamping Journal, March 2009, p. 12

 

#628-2 - Groseclose, A., "Evaluating lubricant performance for stamping" - Part II: Determining the best lubrication conditions for tryout - Stamping Journal, April, 2009, p. 10

 

#628-7 - Billur, E., “Die Materials and Wear in Stamping AHSS - Part I - Die Wear and Die Coatings”, Stamping Journal, Jan/Feb. 2010, p. 8

 

#628-8 - Billur, E., “Die Materials and Wear in Stamping AHSS - Part II - Tests for Evaluating Galling and Wear”, Stamping Journal, March/April 2010, p. 10

 

#628-9 - Billur, E., “Die Materials and Wear in Stamping AHSS - Part III - Research Results”, Stamping Journal, May/June 2010, p. 12


#628-10 - Subramonian, S., and Altan, T., "Evaluation of Lubricants for Stamping Galvanized Steels Part I - Evaluation Using SDT, Stamping Journal, July/Aug 2010, p. 8


#628-11 -Subramonian, S., and Altan, T., "Evaluation of Lubricants for Stamping Galvanized Steels - Part II - Deep Drawing Test", Stamping Journal, Sept/Oct 2010, p.8


#630 - Subramonian, S., Kardes, N., Demiralp, Y., Jurich, M., and Altan, T., "Evaluation of Stamping Lubricants in Forming Galvannealed Steels for Industrial Application", Journal of Manufacturing Science and Engineering, Dec 2011, v. 133, issue 6

 

#664-6 - Mao., T. and Altan, T., "Evaluating dry-film and wet lubricants for aluminum stamping", Stamping Journal, Sept/Oct. 2014, p. 16

 

#668 - Ju., L., et al., Evaluation of Lubricants for Stamping Al 5182-0 Sheet using Cup Draw Test",  ASME, Vol. 137, Oct. 2015, p. 051010-1 to 051010-8

 

#676-1 - Fallahiarezoodar, A., et al., “Examining lubricant performance in forming AHSS”, Stamping Journal, Jan/Feb, 2015, p. 10

 

#681 - Altan, T., “Forming Trends in the Automotive Industry and Their Impact on Lubrication - The Drive to Lightweight Materials’ (pdf slides) presented at the STLE Annual Meeting, May 19, 2015, Dallas, TX

 

#686 - Kuvin, Brad, "A Data-Driven Approach to Lubricant Selection", Metal Forming Magazine, June 2016, p. 26

 

#683-5 - Hoschouer, C., et al., "Evaluation of  Lubricant Performance Using the Cup Drawing Test (CDT)", Stamping Journal, September/October 2016