You are here

Friction/Lubrication

Number

Title

Authors

Year

CPF-2.5/09/01

Evaluation of Stamping Lubricants to Improve Stamping Quality - Part I

N/A

2009

CPF-2.5/09/01-a

Evaluation of Stamping Lubricants to Improve Stamping Quality - Progress Report-2 (April 2009)

N/A

2009

CPF-2.3/08/01

Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) - Fifth Progress Report: Evaluation of Stamping Lubricants and Tool Materials Using the Twist Compression Test

N/A

2008

CPF-2.3/08/02

Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) - Sixth Progress Report: Evaluation of Die Coatings and Stamping Lubricants Using the Strip Drawing Test

N/A

2008

CPF-2.3/08/03

Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) - Seventh Progress Report: Evaluation of Die Coatings Using the Strip Drawing Test

N/A

2008

CPF-2.2a/07/04

Simultaneous Determination of Flow Stress and Friction Coefficient in Sheet Metal Forming - Development and Application of Modified Limiting Dome Height (MLDH) and Limiting Dome Height (LDH) Test

N/A

2007

CPF-2.3/07/01

Investigation of Galling in Forming Galvanized AHSS - Second Progress Report: Twist Compression Test of Galvanized AHSS

N/A

2007

CPF-2.3/07/02

Investigation of Galling in Forming Galvanized AHSS - Third Progress Report: Evaluation of Deep Drawing Performance of various Stamoing Lubricants with DP 590GA

N/A

2007

CPF-2.3/07/03

Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) - Fourth Progress Report: Evaluation of Stamping Lubricants in Forming AHSS Using Deep Drawing and Ironing Test

N/A

2007

CPF-2.3/06/01

Investigation of Tribological conditions in forming uncoated and galvanized advanced/ultra high strength steels - A literature review

N/A

2006

CPF-2.3/06/07

Determination of Critical Interface Temperature and Pressure for Initiation of Galling by Using the Finite Element (FE) Analysis

N/A

2006

03-R-04

Study of the Stamping Lubricant Tester

Shi, Yadav, Ngaile, Altan

2003

03-R-74

Evaluation of Fuchs Lubricants using the Olsen Cup Test

N/A

2003

01-R-38

Performance Evaluation of Stamping Lubricants at Various Temperatuures Using Ironing Test

N/A

2002

02-R-37

A Procedure for the Evaluation of Lubricants at Different Temperatures Using the Ironing Tooling

Alverado, N.Jain, Ngaile, Altan

2002

01-R-74

Design of Tooling to Evaluate Lubrication in Sheet Metal Forming

Wekerle, Alvarado, Jain, Ngaile, Altan

2001

96-33-S-FFT

State of the Art Review: Stamping Parameters and Their Effects on Sheet Metal Formability

Thomas, Alvarado, Ahmetoglu, Akgerman, Altan

1996

95-51-S

Affordable Sheet Formability Testing System

Sadagopan, Wagoner, Siles

1995

94-43-S

Forming of Tailor-Welded Blanks

Saunders, Wagoner, Bhatt

1994

93-41-S

Three-dimensional finite element modeling of new laboratory sheet forming tests

Saunders, Wagoner

1993

91-15-S

A New Simulative Test to Assess Frictional Effects in Sheet Sretching

Wang, Saunders, Wagoner

1991

91-16-S

Review of Frictional Testing in Sheet Forming

Wang, Wagoner

1991

91-27-S

Evaluation of Failure Estimation and Prediction Techniques in Sheet Metal Forming

Asthana, Ahmetoglu, Kinzel, Altan

1991

91-38-S

Finite-Element Simulation of a Plane-Strain Formability Test

Miles, Naraasimhan, Wagoner, Siles

1991